Image courtesy of: https://www.rootstrap.com/blog/how-ai-is-helping-to-improve-robotic-arms/

Image courtesy of: https://www.rootstrap.com/blog/how-ai-is-helping-to-improve-robotic-arms/

Applicable Skills Acquired Throughout This Project

Soft Skills Technical Skills

<aside> 👥 Teamwork

</aside>

<aside> 📧 Communication

</aside>

<aside> ✅ Problem-Solving

</aside>

<aside> ⏱️ Time Management

</aside>

<aside> 📈 Research

</aside>

<aside> 💻 Computer-Aided Design

</aside>

<aside> 📌 Raspberry Pi

</aside>

<aside> 🖨️ 3D Printing

</aside>

<aside> 🪚 Laser Cut

</aside>

<aside> 🪚 UX Design

</aside>

<aside> 🛠 Sensors

</aside>

This project is up in the air…freedom to do whatever you want.

<aside> ✅ At the beginning of this project, Professor McDonald was constantly reminding us that as easy as it may sound, this project was going to be difficult. This reflection contains all the ups, downs and roadblocks my team and I overcame, to successfully design a prototype that can make an IMPACT!

</aside>

Preliminary Research and Design

Our preliminary research process was very rocky to begin, as was our first design. We were planning on making an epi-pen training device. This was going to be used for kids who weren’t able to apply the correct force to get the required medications in the desired location.

<aside> 🪚 My partner and I, on the modelling subteam, were finding possible mechanisms that could effectively work for this training device. The coding subteam, on the other hand, was brainstorming what sensors were going to be used and how to implement them.

</aside>

Epipen Training Device- Possible Design

Epipen Training Device- Possible Design

This part is when we switch our whole design…REWIND

<aside> 🪚 A constant issue my group ran into was agreeing on one idea. My group member and I really liked the path we were taking. Unfortunately, the other two members were still not fond of the idea since they thought it was going to be difficult to design. This is where our group lacked communication since it seemed we were throwing different ideas around. However, we ended up sitting down and splitting up the pros and cons for different designs and we decided to move forward with an automated bed rail.

</aside>

Image courtesy of: https://kids.frontiersin.org/articles/10.3389/frym.2017.00019

Image courtesy of: https://kids.frontiersin.org/articles/10.3389/frym.2017.00019

Image courtesy of: https://www.amazon.com/bed-rail-adjustable/s?k=bed+rail+for+adjustable+bed

Image courtesy of: https://www.amazon.com/bed-rail-adjustable/s?k=bed+rail+for+adjustable+bed

<aside> 🪚 Before starting we wanted to ensure the patient demographic was established and concrete. After much research and talking to a group member's grandfather about his experience using bed rails, we realized that aging can make independent living difficult. Thus, we wanted to make an automated bed rail for seniors who are at risk of stroke.

</aside>

<aside> 🚀 As a part of the modelling subteam, we had various designs we wanted to do. However, we had to ensure the correct amount of research and proof was going into our mechanism as this would need to be portrayed as a real prototype.

</aside>

Refined Sketch 1

Both my partner and I first came up with various sketches and did our respective preliminary research.

Refined Sketches

Refined Sketches

<aside> 💡 We both came up with similar ideas and from there did a combined sketch. This involved a mechanism with three pivots and used rotational motion with a slider, to move the bed up and down. We used a servo motor to achieve this. However, we realized that we were limiting ourselves to this one design that might not be feasible in real life.

</aside>

Refined Sketch Combined

Refined Sketch Combined

<aside> 📞 We learned the importance of communicating our ideas with TAs and the professor. After speaking with Dr. McDonald, he reminded us to consider mechanical advantage, as a servo motor alone would not be able to lift the heavy rail for an extended period. He also encouraged us to look into similar concept designs that bed rails use since it may be difficult to design a new mechanism and expect it to work with the current knowledge we have. This prompted us to explore other designs.

</aside>

Refined Sketch 2

With the provided feedback and reflection, my partner and I planned on going back to square one and looking for more ideas. We looked into the crank and slider mechanism.

Crank and Slider Mechanism- Image courtesy of: https://www.wolfram.com/mathematica/new-in-9/advanced-hybrid-and-differential-algebraic-equations/slider-crank-mechanism.html

Crank and Slider Mechanism- Image courtesy of: https://www.wolfram.com/mathematica/new-in-9/advanced-hybrid-and-differential-algebraic-equations/slider-crank-mechanism.html